浮选机

浮选机适用于有色黑色金属的选别，还可用于非金属如：煤莹石、滑石的选别。

该浮选机由电动机三角代传动带动叶轮旋转，产生离心作用形成负压，一方面吸入充足的空气与矿浆混合，一方面搅拌矿浆与 物混合，同时细化泡沫，使矿物粘合泡沫之上，浮到矿浆面再形成矿化泡沫。调节闸板高度，控制液面，使有用泡沫被刮板刮出。

　　this machine is applicable for the separation of nonferrous metal and ferrous metal and nonmetal, such as fluorite and talc.

　　the impeller is driven by v-belts, which can bring the centrifugal effect to form the negative pressure. on the one hand, to inhale sufficient air to mix with ore pulp; on the other hand to stir ore pulp and mix with medication to form the mineralized froth. to adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board.

浮选机使用说明：
　　开机前应先 各部位螺栓，停机起动前应先手动代轮旋转，以防沉淀物淤积增加电动机负荷，工作时应细心调整闸门高度，使液面保持稳定，随时将矿浆液面上的矿化泡沫刮入流槽。叶轮与定子应保持一定的间距，磨损时应注意更换，泵体内轴承每三 要保养一次。
　　易损件：叶轮，定子。
　　to check the bolts before starting the machine and to use hand instead of impellers to prevent the sediment from adding the burden of electromotor. to adjust the height of strobe carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. the impellers and stators should have a distance and should be changed when they are worn. the bearing in the pump should be maintained every three months.
　　easy wear parts: impellers and stators